Universal Pallet Rack Safety Bolt - FM7×50 Drop Pin, 0.570" (14.5mm) Top Hat, 0.275" (7mm) Width, 1.970" (50mm) Height - Beam Locker for Warehouse Storage (5 Packs, 50 Pcs/Pack) - Secure Shelving & Racking Systems

Angle: 91~89° bend at the top of pin.Measurement: +/- 0.01″ (0.254 mm) general tolerance.Drop pins offer an immediate solution to add safety to your warehouse pallet racking system and are an essential component of a pallet rack system and according to OSHA, safety clips need to be replaced when lost or damaged.RMI's ANSI MH16.1-2012 states that except for movable-shelf racks, beams subject to machine loading shall have connection locking devices (or bolts) capable of resisting an upward force of 1,000 pounds (453.6 kilograms) per connection without failure or disengagement.One of the most dangerous issues with used pallet racks is the beam to frame connection. A rack collapse is nothing to brush under the rug and as a safety manager or business owner it is your responsibility to make sure that your pallet racks are safe for your employees. A used rack system with missing or damaged safety pins can put your entire company at risk. All it takes is a small bump from a pallet or forklift and the entire rack system could come tumbling down. Pins for used pallet racks can increase safety if properly installed in your rack system and could possibly save lives. Routine rack safety inspections can improve safety in your warehouse by identifying missing or damaged safety mechanisms.Will these Pallet Rack Safety Bolts work in my used pallet rack system? Our universal pins fit in almost all selective used pallet rack systems. The key is to find the aligning holes either on the face of the cross beam or on the inside accessory hole. Almost all pallet storage rack systems are equipped with a beam to frame safety clip. This can be called a number of things including: beam locking device, j bolt, pallet rack safety bolt, universal drop pins, pallet rack j bolts, j pins, and more. All of beams should have some sort of beam to frame locking device at each connection.

✅ ULTIMATE BOLT - Drop pins reduce the disengagement risk of beams becoming accidentally disconnected. If a forklift operator lifts a pallet too high, the pallet (or forks) can push beam up and cause it to disconnect from frame, resulting in pallets falling from very high up. Safety bolts offer a secure safety connection from pallet rack cross beam to upright frame and help support pallet racks and shelving units. Instantly add heavy duty reinforcement with standard or teardrop alignment holes.

✅ DROP-IN INSTALLATION - Pins are installed in the side of beam endplate and connect through the punch on the side of frame, which secures the beam in place and prevents it from disconnecting accidentally. Each pin clips in instantly without using tools or complicated setup. Simply insert the smaller end into a pallet rack's alignment hole and gravity does the rest and holds them in place with low maintenance. Our pins are compatible with most styles of standard selective teardrop rack systems.

✅ PROFESSIONAL GRADE - Without safety clips, lift truck operators can accidentally dislodge beams from the racking, which may cause costly damage to product and threaten personnel safety. Be proactive and outfit your warehouse with drop pins before an incident takes place. Trusted by large commercial warehouses and businesses all over the world, our universal design pins with bright zinc plated finish are coated to protect against rust, useful in your business, home or DIY shelving project.

✅ BEST VALUE PACK - A simple solution to increase safety in rack system for warehouse managers. Simply confirm the width of punch holes and take a step towards a safer warehouse. Get the best bang for your buck with our 50-count bulk pack of universal safety pins. 50 pins can add complete locking support for up to 25 shelving cross beams. Always make sure your shelving units are reinforced with our pins to ensure top safety and support, making your warehouse a place with low risk to work.

✅ STOP POTENTIAL FAILURE NOW - Used rack systems often have missing or damaged safety clips which puts warehouse managers and distribution facilities at risk because pallet rack beam clips are an essential safety component of a rack system. When these clips are missing, rack systems are more susceptible to failure. Buy our drop pins for your new or used pallet rack system to keep from potential dislodging. Join thousands of satisfied business and homeowners...Click Add-to-Cart to order Today!